POWDP25100
EN
Copyright © 2021 VARO
P a g e
|
6
www.varo.com
5.5
Service
▪
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 ADDITIONAL SAFETY INSTRUCTIONS FOR RECIPROCATING SAW
▪
Do not start the tool with the blade touching any surface. The blade action will bounce the
tool and may cause body injury.
▪
Allow the tool to come to a complete stop before putting it down. A running tool will jerk
when the blade tip contacts any surface.
▪
Do not cut oversized work pieces
▪
Do not cut nails or screws unless you are using a blade specifically designed for this
purpose. Inspect your material before cutting
▪
Before switching on the tool, be sure the blade in not contacting the work piece.
▪
Keep hands away from moving parts and on the top surface of the work piece. Do not
place hands below work surface while saw is operating.
▪
Hold tool by insulated grip surface when performing an operation where the cutting tool
may contact the hidden wiring or its own cord. Contact the alive wire make exposed the
metal parts of the tool alive and shock the operator.
▪
Do not stare at the tool with the blade touching any surface. The blade action will bounce
the tool and may cause bodily injury.
▪
Always wear safety glasses or goggles, normal prescription eye or sunglasses are not
safety glasses
▪
Check your area for proper clearance before cutting. This will avoid cutting into your
workbench, the floor, etc.
▪
This product is not a toy. Keep it out of reach of children.
▪
People with pacemakers should consult their physician(s) before use. Electromagnetic
fields in close proximity to heart pacemaker could cause pacemaker interference or
pacemaker failure. In addition, people with pacemakers should:
−
Avoid operating alone.
−
Do not use with power switch locked on.
−
Properly maintain and inspect to avoid electrical shock.
7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND
CHARGERS
7.1
Batteries
▪
Never attempt to open for any reason.
▪
Do not store in locations where the temperature may exceed 40 °C.
▪
Charge only at ambient temperatures between 4 °C and 40 °C.
▪
Store your batteries in a cool dry place (5 °C-20 °C). Never store batteries in discharged
state.
▪
It is better for Li-ion batteries to discharge and reload them regularly (at least 4 times a
year). The ideal charge for long-term storage of your Li-ion battery is 40% of capacity.
▪
When disposing of batteries, follow t
he instructions given in the section “Protecting the
environment”.
▪
Do not cause short circuits. If connection is made between the positive (+) and negative (-)
terminal directly or via accidental contact with metallic objects, the battery is short circuited
and an intense current will flow causing heat generation which may lead to casing rupture
or fire.
▪
Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators
and other polymer components may be damaged resulting in electrolyte leakage and/or
internal short circuiting leading to heat generation causing rupture or file. Moreover do not
dispose of the batteries in fire, explosion and/or intense burning may result.
