POWX0047LI
EN
Copyright © 2015 VARO
P a g e
|
9
www.varo.com
Do not use any abrasive or solvent-based cleaner. Use clean cloths to remove dirt, carbon
dust, etc.
WARNING: Do not allow brake fluids, gasoline, petroleum-based products, penetrating oils,
etc. come in contact with plastic parts, they contain chemicals that can damage, weaken or
destroy plastic.
WARNING: Always wear safety goggles or safety glasses with side shields when using
compressed air to clean tools. If the operation is dusty, also wear a dust mask.
BATTERIES: The battery pack for this tool is equipped with a Li-ion
rechargeable battery. Do not disassemble battery pack and attempt to
replace the batteries inside.
9.2
Service
Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
10 STORAGE
Store your tool in a clean, dry, frost free environment.
Battery storage
Store your batteries in a cool area. Optimal temperature for storing your Li-ion battery for
longer term is 2°C. (capacity loss will only be 6% / year (compared to 20% at 25°C)).
Never store batteries in discharged condition.
It is better for Li-ion batteries to recharge them frequently. Optimal long time storage
charge for your Li-ion battery is at 40% of their capacity.
11 TECHNICAL DATA
Rotation Speed
0-350 / 0-1300 min-1
Max. Drill-bit diameter
10 mm
Rated Voltage DC (Un)
18 V
Battery capacity
1500 mAh
Battery type
Li-ion
Max. torque
38 Nm
Number of LED’s
2
Chuck type
10 mm keyless Chuck
Torque positions
21+1
Plug Type
VDE
Charger output voltage /current
21 V / 1 A
Charger time
1 H
Battery quantity
2
12 NOISE
Noise values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
74 dB (A)
Acoustic power level LwA
85 dB (A)
ATTENTION! The sound power level may exceed 85 dB(A), in this case
individual hearing protection shall be worn.
aw (Vibration)
Max 2.4m/s²
K = 1.5 m/s²
