POWX139
EN
Copyright © 2014 VARO
P a g e
|
8
www.varo.com
8 OPERATION
8.1
Adjust the angle of the arm
Before adjusting the angle of the arm,
please make sure that the machine is
turned off and unplugged.
The operator can adjust the arm in any
angle according to the position or the
shape of work pieces, and then fix it into
place.
Loosen the angle adjustment lever, then
you can lift up the arm. Rotate the arm
along the pivot to the desired position, then
lock the angle adjustment lever and fix the
arm into place.
8.2
Switch operation
The tool is operated by
pressing/releasing the main switch.
The machine will start by pressing the
main switch and stop when releasing
the main switch.
Press the lock button and the main
switch at the same time to lock the
swith into position and the machine will
work continuously.
Press the main switch all the way to the
end and then release it to unlock the
machine again.
4
k
n
o
b
3
k
n
o
b
Rang
e
6
k
n
o
b
7
k
n
o
b
