POWX240
EN
Copyright © 2015 VARO
p a g e
|
9
www.varo.com
11.3
Lubrication
The machine requires no additional lubrication.
12 SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by a
qualified person (qualified electrician).
13 STORAGE
Thoroughly clean the whole machine and its accessories.
Ensure to locked tool head (12, Fig.1), before storing it.
Store it out of the reach of children, in a stable and secure position, in a cool and dry place,
avoid too high and too low temperatures.
14 TECHNICAL DATA
type
POWX240
Mains voltage
230-240V
Mains frequency
50 Hz
Power input
600 W
No load speed
3000 rpm
Blade size (diameter x bore x thickness)
Ø 180 x 25,4 x 2,2mm
Max. cutting depth (90°)
25 mm
Max. cutting depth (45°)
15 mm
Mitre angle
0-45°
Bevel
0-45°
Table dimensions
500 x 385mm
Max cutting length
400mm
Weight
30 kg
15 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
84 dB(A)
Acoustic power level LwA
87 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
1,7 m/s²
K = 1,5 m/s²
