POWXQG4060
EN
Copyright © 2014 VARO
P a g e
|
19
www.varo.com
enough.
Unit starts,
but engine
has low
power.
Fuel filter is plugged.
Incorrect lever position.
Dirty spark arrestor screen.
Dirty air filter.
Incorrect carburetor mixture
adjustment setting service dealer.
Replace the fuel filter.
Move to run position.
Replace spark arrestor screen.
Remove, clean and reinstall filter.
Have carburetor adjusted by an
authorized service center.
Engine
hesitates.
Incorrect carburetor mixture
adjustment setting.
Air filter is plugged.
Old or improperly mixed fuel.
Have carburetor adjusted by an
authorized service center.
Replace or clean the air filter.
Drain gas tank/add fresh fuel mixture.
No power
under load.
Incorrect carburetor mixture
adjustment setting.
Old or improperly mixed fuel.
Air filter is plugged.
Fouled spark plug.
Have carburetor adjusted by an
authorized service center.
Drain gas tank (see storage)/add fresh
fuel mixture.
Replace or clean the air filter.
Replace or clean the spark plug.
Runs
erratically.
Incorrectly gapped spark plug.
Plugged spark arrestor.
Dirty air filter.
Clean/gap or replace plug.
Clean or replace spark arrestor.
Clean or replace air filter.
Smokes
excessively.
Incorrect carburetor mixture
adjustment setting.
Incorrect fuel mixture.
Have carburetor adjusted by an
authorized service center.
Use properly mixed fuel (40:1 mixture).
16 WARRANTY
This product is warranted for a 5-year period effective from the date of purchase by the
first user.
This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
Repairs may only be carried out by an authorized customer service centre for Powerplus
tools.
You can always obtain more information at the number 00 32 3 292 92 90.
Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.
Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike,
erroneus net voltage. This list is not exhaustive.
Acceptance of claims under warranty can never lead to the prolongation of the warranty
period nor commencement of a new warranty period in case of a device replacement.
Devices or parts which are replaced under the warranty therefore remain the property of
Varo NV.
