POWXQG6060
EN
Copyright © 2015 VARO
P a g e
|
3
www.varo.com
BRUSH CUTTER 51,7CC
POWXQG6060
1 APPLICATION
Depending on the assembled cutting tools, the bush cutter can be used to mow lawns or
meadows, and to trim scrub, shrubs, bushes and very small trees. It is for private use. The
device cannot be used for other purposes.
WARNING! For your own safety, read this manual and general safety
instructions carefully before using the appliance. Your power tool should only
be passed on together with these instructions.
2 DESCRIPTION (FIG. A)
1.
Cutting disc
2.
Drive shaft assembly
3.
Throttle trigger
4.
Ignition switch
5.
Safety switch
6.
‘Bike’ handle
7.
Harness attachment/cable lock
8.
Air filter cover
9.
Knob fuel tank
10. Fuel tank
11. Primer bulb
12. Choke
13. Protection guard
14. Spool
3 PACKAGE CONTENT LIST
Remove all packaging materials.
Remove remaining packing and package inserts (if included).
Check that the package contents are complete.
Check the appliance and all accessories for transportation damage.
Keep the packing materials as long as possible till the end of the warranty period. Dispose
it into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
Brush cutter
Harness/protecting guard
Cutting disc/Screwdriver
Spool/ Spark plug wrench
Manual
Hex key 4/5mmIf any parts are missing or damaged, please contact your
dealer.
