19.0 Panel Mount PC
486-0010-01-02
21
PCI Express Root Port Func
Scroll to this item and press <Enter> to view the sub menu to decide the PCI Express Port.
Press <Esc> to return to the Advanced Chipset Featurs page, and press it again, return to the Main
Menu page.
*** VGA Setting ***
PEG/Onchip VGA Control
This setting allows you to select whether to use the onchip graphics processor or the PCI Express
card. When set to [Auto], the BIOS will check if a PCI Express graphics card is installed or not. If a
PCI Express graphics card is detected, the board will boot up using that card. Otherwise, it is
defaulted to the onchip graphics processor.
PEG Force X1
This BIOS feature allows you to convert a PCI Express X16 slot into a PCI Express X1 slot. When
this item is enabled, the PCI Express X16 slot will be forced to run in the PCI Express X1 mode.
When this item is disabled, the PCI Express X16 slot will be allowed to run its normal PCI Express
X16 mode.
On-Chip Frame Buffer Size
Use this item to set the VGA frame buffer size.
DVMT Mode
DVMT (Dynamic Video Memory Technology) helps you select the video mode.