19.0 Enclosed VESA Mount PC
486-0013-00-03
8
Turning the system On and Off
Before connecting the Enclosed VESA Mount PC to power, connect any peripheral devices. As
a general rule, any peripheral device should only be connected or disconnected when the
Enclosed PC is off with the exception of any USB peripheral.
The Enclosed VESA Mount PC is turned on using the main power push button switch located on
the rear lower panel. Once the Enclosed PC main switch is turned on the computer power
pushbutton switch must be depressed for Windows to start. Windows must be properly shut
down before the main power switch is turned off to prevent the chance of corrupting files in the
operating system.
The Enclosed VESA Mount PC is rated for continuous duty. However, to extend the life of the
various components and conserve power, it is highly recommended that the system be properly
shut down and power turned off when the Enclosed VESA Mount PC is not in use.
LCD Monitor Warm-up Time
All LCD monitors need time to become thermally stable the first time you turn them on.
Therefore, to achieve more accurate adjustments for parameters, allow the LCD monitor to
warm (be on) for at least 20 minutes before making any screen adjustments.
Maintenance
The Enclosed VESA Mount PC is designed to provide optimum service and performance with
minimal maintenance including the occasional external cleaning. For cleaning the Enclosed
VESA Mount PC enclosure follow the suggested guidelines.
General –
NEVER use abrasive cleaners or solvent-based cleaners!! Use a clean soft cloth.
The Enclosed VESA Mount PC should only be opened and serviced by a qualified technician.
Keep the area around the Enclosed VESA Mount PC clear and free of excessive dirt or other
contaminants.
For Additional Assistance
Contact Your VarTech Sales Representative
Vartech Systems, Inc.
11529 Sun Belt Ct.
Baton Rouge, LA 70809
800-223-8050
Fax: 225-297-2440
www.vartechsystems.com
