6 / 9
Colo
– Manual color dimming mode
1.
Tap the ESC button and UP button or DOWN button until “CoLo” is displayed, press ENTER.
2. “CoLX”
will now be displayed
, “X” represents a number between 0-9. Press the UP or DOWN
buttons to select either a static color mode.
3. Press UP and DOWN Button until “ATF” is displayed, now the fixture is under the manual color
dimming mode. Press ENTER to display “red” ”green” ”blue” and then press ENTER again, it will
display “rXXX” ”GXXX” “bXXX”, XXX represents the value of Red, Green, or blue. Press the UP or
DOWN to set up the value.
SLav
- This menu will let you select your desired Master/slave mode
1. Tap the MENU button until “SLav” is displayed, press ENTER.
2. “Sla ” will now be displayed, Slave mode is confirmed. It will be slaved by auto mode.
VER
- This will display the software version
1. Tap the MENU button until “VER” is displayed. Press the ENTER button and the software version
will be displayed.
2. Press the MENU button to leave this function.
Pasd - With this function you can activate or deactivate the display buttons.
1. Tap the MENU button until “Pasd” is displayed. Press the ENTER button to choose ON or OFF
.
2. Deactivate the display buttons.
Tap any button till
is displayed.
Now tap „UP“, „DOWN“, „UP“, „DOWN“ ,“ENTER“ to get into the main menu.
7. DMX control mode
Universal DMX Control: This function allows you to use a universal DMX-512 controller for
controlling the LED Street Bar 16x3W RGB IP65. A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The LED Street Bar 16x3W RGB IP65 uses six DMX channel modes. See next page for detailed
description of the DMX traits.
2. This will allow you to create your own programs.
