V A S A
12
May 2015
Vasa Swim Ergometer User’s Manual
➋
➍
socket set screw
is tight
➎
U-bolt is
towards front
narrow end of bench is towards front
➏
➐
tether cord attached
➑
cables are attached correctly to
“R” & “L” labeled ports.
➒
hose clamp is tightened around socket
prongs and secures mounting ball
➊
button head screw and nut are
assembled on stanchion head
and monorail
➌
button head
screw and nut
are assembled
on stanchion
head and
monorail
power meter is mounted
socket set screw
is tight
13
11
10
foot brace is positioned for
comfort & locked in place.
(optional accessory)
monitor angle & position adjusted
PART 1 - Assembly
1-3. POST ASSEMBLY SAFETY CHECKLIST
Please review the steps below to assure that your Vasa Ergometer is assembled correctly and ready for safe
use
(check if complete)
.
FRONT
1. ____ Button head screw and nut are assembled on front stanchion head and monorail.
2. ____ Socket set screw on front stanchion head is tightened against the monorail.
REAR
(CHECK IF COMPLETE)
3. ____ Button head screw and nut are assembled on rear stanchion head and monorail.
4. ____ Socket set screw on rear stanchion head is tightened against the monorail.
BENCH / SEAT CARRIAGE
(CHECK IF COMPLETE)
5. ____ U-bolt on the seat carriage is towards the front assembly.
6. ____ Narrower end of the bench is towards the front assembly.
7. ____ Tether cord is attached between rear stanchion and U-bolt on underside of seat carriage.
POWER METER
(OPTIONAL ACCESSORY)
8. ____ Power Meter installed on the mounting stem.
9. ____ Connection cables are attached correctly to “R” and “L” labeled ports on the Power Meter.
10. ____ Hose Clamp is tightened around socket prongs (if applicable).
11. ____ Power Meter is adjusted for best viewing (ANGLE and POSITION).
