MOUNTING OF SWITCHES 25
MOUNTING OF CO
2
RF SWITCH
Always mount the CO
2
RF switch in an easily accessible place in the room
whose CO
2
concentration you wish to control. Always provide for a 230V
supply voltage at the switch.
Step 1:
Remove the switch.
Step 4:
Connect the 230V supply voltage
with the connectors.
Step 2:
Screw the base plate
firmly onto the wall.
Step 5:
Put the cover plate
back on the switch.
Step 3:
Open the flap on the base
plate in order to make the
electrical connections visible.