Sterowanie rekuperatorem może być uzupełnione przez bezprzewodowy czuj-
nik poziomu stężenia CO
2
w powietrzu, dzięki któremu można wybrać określony
bieg rekuperatora lub tryb pracy automatycznej, w oparciu o stały pomiar stę-
żenia CO
2
(= dokładna kontrola zapotrzebowania na wentylację). Przez wielo-
krotne dotknięcie zagłębienia w dolnej części można zmieniać bieg i tryby pracy.
Diody LED w górnej części wskazują aktualny wybór.
CZUJNIK
DWUTLENKU
WĘGLA
Pozycja
Opis
Urządzenie działa na biegu 1 (niski)
Tryb zalecany podczas nieobecności domowników.
Urządzenie działa na biegu 2 (średni)
Tryb domyślny podczas obecności domowników.
Urządzenie działa na biegu 3 (wysoki)
Tryb przewietrzania, zalecany podczas kąpieli, może być
również stosowany w sytuacji zwiększonego zapotrzebo-
wania na wentylację (zwiększona liczba osób w domu, np.
wizyta gości).
Urządzenie pracuje w
trybie automatycznym Eko
Sterowanie automatycznie dostosowuje intensywność
wentylacji do liczby osób przebywających w pokoju, w któ-
rym czujnik jest umieszczony. W pozycji Eko sterowanie
dąży do uzyskania akceptowalnego przez większość lu-
dzi poziomu stężenia CO
2
(950 ppm), oszczędzając w ten
sposób energię na pracy wentylatorów. To ustawienie jest
zalecane w miesiącach zimowych.
Urządzenie pracuje w
trybie automatycznym Komfort
Sterowanie automatycznie dostosowuje intensywność
wentylacji do liczby osób przebywających w pokoju,
w którym czujnik jest umieszczony. W pozycji Komfort ste-
rowanie dąży do uzyskania bardzo niskiego poziomu stę-
żenia CO
2
(800 ppm). To ustawienie jest zalecane w mie-
siącach letnich.
CZUJNIK DWUTLENKU WĘGLA
7