USTERKI
Rekuperator nie działa, a po
użyciu przełącznika doda LED
na płytce sterowania miga:
czerwony – czerwony –
pomarańczowy.
Urządzenie jest wyłączone,
ponieważ temperatura powietrza
wewnątrz budynku jest zbyt
niska.
Zresetować urządzenie
poprzez odłączenie wtyczki
z gniazdka i włożenie
ponownie.
Upewnij się, że przyczyna
została wyeliminowana:
– temperatura wewnątrz
powinna wynosić
co najmniej 16°C;
– kanały są podłączone
prawidłowo (patrz strona
22-23);
Jeśli urządzenie ponownie
się wyłączy należy się
skontaktować z instalatorem.
Pozycja przełącznika
przewodowego jest inna niż ta,
na której urządzenie pracuje.
Są podłączone inne urządzenia
sterujące (na przykład
przełącznik RF).
Ustawić przełącznik
do bieżącego biegu,
a następnie przełączyć się
do żądanej pozycji.
Dioda na przełączniku RF
świeci na pomarańczowo.
Wymień baterię w przełączniku.
Urządzenie nie reaguje na
wyłącznik, dioda LED świeci się
na czerwono podczas naciska-
nia przełącznika RF.
Podłączyć przełącznik
do centrali wentylacyjnej
(patrz strona 31).
Niewystarczające chłodzenie
latem przez funkcję by-passu.
Funkcja by-passu nie oznacza
aktywnego chłodzenia.
Dla optymalnego wykorzystania
możliwości by-passu, należy
w przypadku przegrzania
mieszkania (temperatura
> 23°C) w czasie nocy załączać
wyższy bieg rekuperatora, zaś
w ciągu upalnego dnia uzywać
rekuperatora na najniższym
akceptowanym biegu.
Bateria przełącznika jest bliska
wyczerpania.
Przełącznik nie jest zalogowany
do rekuperatora.
USTERKA
MOŻLIWA PRZYCZYNA
ZALECANE DZIAŁANIE
43