EN
47
SET A WEEK PROGRAM
1 2 3 4 5 6 7
1 2 3 4 5 6 7
P
R
O
G
P
R
O
G
P
R
O
G
1-
From the Standby mode, press for 5 seconds.
When the cursor moves under the setting time symbol ,
press shortly.
2-
Press or .
The cursor moves under
prog
.
3-
Select the desired program with or . If desired, the standard
times can be adjusted: press for at least 5 seconds.
If the standard times apply: press to set the next day
(go to step 4)
1 2 3 4 5 6 7
P
R
O
G
1 2 3 4 5 6 7
P
R
O
G
3.1
The start time flashes and with or you can change this
time at 30 minute intervals.
Press to save.
3.2
The end time flashes and with or you can change this time
at 30 minute intervals.
Press to save.
1 2 3 4 5 6 7
P
R
O
G
2
1
1 2 3 4 5 6 7
P
R
O
G
4-
The second day (Tuesday) flashes.
Repeat the procedure described above for every day of the week.
5-
Once you have chosen a programme for each day, confirm your selection by pressing . The days of the
week will successively scroll on display with the programmes that you set for them (P1, P2, P3, CONF or ECO).
To exit the Programming mode, press twice.
VASCO handleiding E-Panel LR700001 A4 kopie.indd 47
24/10/19 10:38
