Personal aXsGUARD - 7.7.1
Chapter 5. Client-Side Configuration
© VASCO Data Security 2013
26
Figure 5.3. PAX Status Overview
The VPN tunnel will start automatically after importing the PAX certificate (PKCS12). Rebooting is
allowed, but not required. The PAX automatically checks whether a valid client certificate is present.
5.5. Reboot Procedure
1. Log on to the PAX, as explained in
Section 5.4, “Installation Instructions”
.
2. Click on Reboot Now.
Figure 5.4. Rebooting the PAX
• The reboot procedure takes about 60 seconds to complete.
• After starting up or rebooting the PAX, wait until the power LED stops flashing.
• The DMZ LED on the front panel of the PAX indicates that the booting process is still ongoing. Wait
until this LED is no longer illuminated before proceeding.