E-mail Storage How To - Version 8.0.0
Chapter 5. Webmail
© VASCO Data Security 2014
35
1. Log on to the AXS GUARD as explained in the AXS GUARD System Administration How To, which is
accessible via the Documentation button.
2. Navigate to Firewall > Policies > Static.
3. Make sure the int-webmail Firewall Rule is added to a Static Firewall Policy.
Figure 5.6. Webmail Firewall Settings
You can also enable Webmail access from the secure LAN or the DMZ. Access to port 443 should be
allowed for each zone. More information is available in the AXS GUARD Firewall How To, which can
be accessed by clicking on the permanently available Documentation button in the Administrator Tool.
5.3.6. Authentication Settings
In this section, we explain how to configure Authentication for the Webmail service. For details about
Authentication, see the AXS GUARD Authentication How To, which is accessible via the Documentation button
in the Administrator Tool.
If you use Webmail with an external IMAP service (see
Section 5.3.2, “Selecting your Webmail
), the Authentication Services IMAP/Webmail must be set to the suitable Authentication Policy:
• Password if the user’s password on the AXS GUARD is the same as on the back-end server.
• DirectoryServices if the back-end is an Exchange server and the users are synchronized from there.
In all cases, the user must exist on the AXS GUARD to allow Webmail access.
To configure the Webmail Authentication settings:
1. Log on to the AXS GUARD as explained in the AXS GUARD System Administration How To, which is
accessible via the Documentation button in the Administrator Tool.
2. Navigate to Authentication > Services and click on IMAP / Webmail.
