background image

VASNER

VASNER

12

13

0 = Off 
1 = Low 
2 = Medium 
3 = High

5.  If you would like to control the oscillation function, pull or push the knob  
  (2) on the top of the fan head. You can activate / deactivate this function  
  anytime during use of the fan.

Cleaning, maintenance, service and disposal

Cleaning

• 

Always unplug the fan before cleaning it.

• 

For hygienic reasons, you should clean the fan regularly. During long peri-
ods of non-use, it may gather dust. Use a damp cloth or compressed air to 
clean the fan. Do not use a wet, dripping cloth.

• 

If the fan will not be used for a longer period of time, switch it off and dis-
connect the power cord from the outlet completely.

• 

To avoid damaging the lacquer finish, do not use any abrasive cleaning 
agents or chemicals.

Maintenance

In general, the VASNER Ventury T does not require any maintenance. The fan 
must not be opened by unauthorised persons! If there seems to be a problem, 
contact your dealer. 

Service and repair

If you notice any defects or damages to your Ventury T, it must be checked 
and repaired by a specialist. This may be a qualified electrician or your dealer. 
Damage or faults arising from unauthorised repairs, as well as modifications to 
the fan, misuse, negligence, and improper or inadequate maintenance void the 
warranty. Dealers and the manufacturer shall not be liable.

Disposal

The VASNER Ventury T must not be disposed of together with your normal 
household waste. Please take the fan to your local recycling centre to dispose of 
it.

Technical information

Model: 

  VASNER 

Ventury 

T

Item number: 

 

VVVTB (black)

   VVVTW 

(white)

Voltage:   

 

220 - 240V ~ 50 Hz

Power: 

  max. 

35 

W

Speed settings: 

 

3 settings (low, medium, high)

Remote control:   

no

Swivel function:   

yes, oscillation (left, right)

Vertical air control:  

yes, head tilt manually adjustable via wing screw

Rotor diameter: 

 

30 cm

Fan head dimensions: 

35 x 5 cm

Overall dimensions: 

53 cm height, 35 cm width, 27 cm depth

Ø pedestal: 

 

27 cm

Weight: 

  3,9 

kg

Cable length: 

 

1,8 m

Service address:

VASNER Germany / Head Office

Tel.:  

+49 (0)5246 - 93 55 625 

Fax: 

+49 (0)5246 - 93 55 619

Mail: info@vasner.com 

Web: www.vasner.com

VASNER is a brand of MankeTech GmbH.

GB

GB

Summary of Contents for Ventury T










Reviews: