background image

Bluetooth  GPS  Receiver  User  Manual

 

-3- 

Bluetooth  GPS  receiver   

outdoor  or  open  sky  at  least  15~20  minutes  for  sure  3D 

position fixed and almanac updated.

 

1. Introduction 

FGPXBT01a Bluetooth GPS Receiver is a total solution of GPS receiver. High capacity 

rechargeable lithium-ion battery and solar charger circuit build-in, GPS antenna, Blue tooth 

transmit/receive system are included. It is designed on the most advantage GPS 

kernel(

FirstGPS

TM

), got the full-function, industry-level locating capacity and low prices. 

You can use this Bluetooth GPS Receiver

   

  as vehicles navigator, security system, 

geographic measurement, investigations or agriculture purpose. FGPXBT01a Bluetooth GPS 

Receiver

 

operation requirement is a proper power supply and the open sky-view. This Bluetooth 

GPS Receiver

 

can communicate with other electronic devices by Blue tooth interface. Built-In 

Flash Memory can save satellite information and do almanac refresh periodically .This will   

shorten Time To First Fix(TTFF) effectively. 

The Bluetooth  GPS  Receiver

 

is  designed  as a ultra low power consumption device, and  high 

position accuracy.  It  will  update  the satellite position  every second. This  Bluetooth GPS Receiver

 

auto-locating  feature  is  capable  of  automatically  determining  a  navigation  solution  without 

intervention. However, acquisition performance

 

could be interfered and do cold start

 

if the receiver 

were initialized with occurrence of the following events: 

1) First in use     

2)  The  GPS  receiver  is  not  in  use  for  more  than  3  months  or  transportation  over  distances 

further than 500 kilometers. 

3) Failure of the internal memory battery without system standby power. 

 

2. Features and Functions 

1)

Act as WARM/HOT start with built-in battery 

   

back-up power circuit design will keep flash memory and RTC clocking always. 

Shorten TTFF effectively 

2)

Automatically almanac/

 ephemeris

 update in flash mmory   

programmable flash utility to do refresh on satellite orbit data information every 10 minutes. 

 

3)

 

Smart power management solution.

   

GPS Device will automatically shutdown in case of bluetooth un-detected over default time. 

4)

 

Compatible with Bluetooth Serial Port Profile (SPP) completely.

 

5)Support  RTCM  (Radio  Technical  Commission  for  Maritime  Services)  real-time  deviation 

correction capacity, can provide the precision smaller then 1 meter. 

6)Easy  to  combine  with  vehicle,  voyage  navigation,  vehicle  management,  AVL,  personal 

navigation, tracking system and map applications.   

 

Summary of Contents for VA-103























Reviews: