The Instruction Manual and Safety Instructions must be read and understood by anyone
operating the Vastex Conveyor Curing System.
•
The operator should read and understand the instruction manual before operating this equipment. Store instruction manual
and safety instructions near equipment for easy access to operators.
•
VASTEX Autoflash attachment is for use on Vastex Flash units in accordance to the language in this manual. Do not use for
any other purpose unless authorized by Vastex International, Inc. Use of this equipment for any other purpose can be danger-
ous and may cause damage to this equipment, voiding the warranty.
•
It is recommended that the area around this equipment be designated as a work area and only authorized employees be al-
lowed in the area.
•
Children and pets must be kept clear of the work area.
•
Do not place any objects on top of the Autoflash or Flash Head. Surfaces are hot!
•
Never leave equipment unattended.
•
Do not operate Autoflash with any cover or guard removed.
•
Operator must be familiar with controls of the Autoflash and Flash Head.
•
Before starting production, the operator must check that all covers and guards are in place, no material has been placed on or
under the Autoflash or Flash Head, and the work area is clear of obstructions.
•
Always turn off power at the main disconnect at the end of production.
•
In case an abnormal symptom occurs, for example excessive vibration, noise, and strong smell or smoke development, turn
off the VASTEX Autoflash and contact a qualified technician.
•
Do not remove any cover or guard until power at the main disconnect is switched off and locked out. No unauthorized persons
are to be allowed inside the control boxes.
•
Turn off and lock out power at the main disconnect before any cleaning or maintenance.
•
Only qualified technicians should be allowed to make repairs on the VASTEX Autoflash.
•
Noise and vibration:
This equipment does not produce noise exceeding 70 dB(A) at workstations.
•
Operating Temperature: Vastex Equipment should not be operated in temperatures below 40°F(5°C) or above 105°F
(41°C)
Congratulations, you have chosen a VASTEX Autoflash Attachment. VASTEX has been designing and building screen printing
equipment since 1960 and has the knowledge and expertise to supply a quality machine and help you keep it running for years to
come. VASTEX has innovated many of the features found in screen printing equipment today from control methods, modular fea-
tures, air movements, belt tracking and even the dual rotary manual press. All components are tested to be sure they work correctly
when the equipment leaves our factory.
Introduction
Safety
Pg. 2
Summary of Contents for Autoflash
Page 12: ......
