Assembly (SHHD
-
STAND)
1)
Remove all parts from the box they were shipped in.
2)
Place Legs and Middle on floor as shown. Note hole
in left leg for orientation.
3)
Install and
Tighten
-
(16) #14 Sheet Metal Screws
Use 3/8 Socket or Wrench
4)
Install and
Tighten (4x)
-
Attach Wheel and Stud to each bracket with 1/2” nut.
Use 3/4 Socket or Wrench
-
Attach Wheel bracket to Stand Legs using (2) #14
Sheet Metal Screws
Use 3/8 Socket or Wrench
5)
Install and
Leave Loose
-
(4) 3/8 Bolts, lock washers, and nuts
6)
Install and
Leave Loose
-
(4) 3/8 Bolts, washers, and lock washers
1
2
3
4
5
Pg. 5
Summary of Contents for Autoflash
Page 12: ......
