Series 590
INSTALLATION
298292EB
Edition 2013-05-13
33/56
Inquiry function
Command
Acknowledgement
(within 10ms after reception of command)
Description
FATAL ERROR
STATUS
Get
[i:50][CR][LF]
[i:50][abc][CR][LF]
data length 3 characters
abc
error code = 000 (no error) or 020 (E
.
20) or 022 (E
.
22) or 040 (E
.
40)
See chapter: «Trouble shooting» for details.
This function returns an error code in case of any malfunction of the device.
THROTTLE CYCLE
COUNTER
Get
[i:70][CR][LF]
[i:70][xxxxxxxxxx][CR][LF]
data length 10 characters
xxxxxxxxxx number of throttle cycles
This function returns the number of throttle cycles. A movement from max. throttle position
to open back to max. throttle position counts as one cycle. Partial movements will be
added up until equivalent movement is achieved.
POWER UP COUNTER
Get
[i:72][CR][LF]
[i:72][xxxxxxxxxx][CR][LF]
data length 10 characters
xxxxxxxxxx number of power ups
This function returns the number of control unit power ups.
FIRMWARE
CONFIGURATION
Get
[i:82][CR][LF]
[i:82][xxxxxxxx][CR][LF]
data length 8 characters
xxxxxxxx
firmware version, e.g. 590P1E34
This function returns firmware version of the device.
IDENTIFICATION
Get
[i:83][CR][LF]
[i:83][xxxxxxxxxxxxxxxxxxxx][CR][LF]
data length 20 characters
xxx...xxx
identification code, e.g. 590..-..G-....
unused digits are filled up with spaces (20 hexadecimal)
This function returns an identification code. This code is unique for each valve and allows
tracing.
Table 4-9