EN
ENGLISH
4
INSTRUCTIONS
1. Open the package and insert the battery into the battery
insertion port of the electric scissors.
2. Move the button to the left.
3. Squeeze the trigger twice to enter the active state.
4. Normal cutting: press the trigger, the blade closes, re-
lease the trigger and the blade opens. Keep holding the
trigger for 3 seconds, the buzzer starts to sound, and the
blade will close.
5. Before working, press the trigger at intervals to check
the unloaded sheet several times to see if it is normal.
6. Begin work after it has been verified that it is normal.
GENERAL SAFETY RULES
WARNING!
Read all instructions. Failure to comply with
these instructions listed below may result in
electric shock, fire and/or serious injury. The term “power
tool” in all of the warnings listed below refers to your live
(corded) or battery-powered (cordless) power tool.
SAVE THESE INSTRUCTIONS
DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to safety rules for
the subject product. MISUSE or failure to follow the safety
rules stated in this instruction manual may cause serious
personal injury.
1 Work area
1) Keep the work area clean and well lit. Untidy or dark
areas cause accidents.
2) Do not use in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power
tools create sparks that can ignite dust or fumes.
3) Keep children and bystanders away during use. Distrac-
tions can cause you to lose control.
2 Electrical Safety
1) Never modify the plug. Do not use adapters. Unmodified
plugs and corresponding sockets will reduce the risk of
electric shock.
2) Avoid contact of the body with grounded surfaces, such
as pipes, radiators, cookers and refrigerators. There is an
increased risk.
3) Do not expose power tools to rain or wet conditions. Wa-
ter will increase the risk of electric shock.
4) Never use the cord to carry, pull or unplug the power
tool. Keep cord away from heat, oil, sharp edges, or mo-
ving parts. Damaged or tangled cords increase the risk of
electric shock.
5) When using a power tool outdoors, use an appropriate
extension cord. Use of an outdoor power tool cord reduces
the risk of electric shock.
6) If use of a power tool in a wet location is unavoidable,
use a RCD protected supply. The use of an RCD reduces the
risk of electric shock.
3 Personal Safety
1) Stay alert and use common sense. Do not use while tired
or under the influence of drugs, alcohol or medication. A
moment of inattention in its use can cause serious per-
sonal injury.
2) Always wear eye protection such as dust mask, non-slip
safety shoes, helmet or hearing protection. Proper equip-
ment will reduce personal injury.
3) Make sure the switch is in the off position. Carrying
power tools with your finger on the trigger or plugging them
in directly invites accidents.
4) Remove any adjusting key before turning the power tool
on. A spanner left attached to a rotating part of the power
tool can cause personal injury.
5) Maintain posture and balance at all times. This allows
better control of the power tool in unexpected situations.
6) Dress appropriately. Do not wear inappropriate clothing
or jewellery. Keep your hair, clothing, and gloves away from
moving parts. Loose clothing, jewellery or long hair can get
caught in moving parts.
7) If devices are provided for the connection of dust extrac-
tion and collection facilities, ensure that they are connected
and used correctly. The use of these devices can reduce the
risks related to dust.
4 Electric tool, use with care
1) Do not force the tool. Use only for your application. The
right power tool will do the job better and safer at the right
speed.
2) Do not use the tool if the switch does not turn it on
and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
3) Disconnect from power source and/or remove battery
pack before making any adjustments, changing acces-
sories or storing power tools. Such preventive safety mea-
sures reduce the risk of starting the power tool accidentally.
4) Store power tools out of the reach of chil-
dren and do not allow persons unfamiliar with the
Summary of Contents for 48306
Page 1: ...48306...
