EN
ENGLISH
7
MAINTENANCE
CAUTION:
- Always make sure the tool is turned off and the batteries
removed before attempting inspection or maintenance.
- Never use gasoline, benzene, thinner, alcohol or the like. It
can result in discoloration, warping or cracking.
CLEAN THE TOOL
Clean the tool by wiping away dust with a dry or soap-
soaked cloth.
BLADE MAINTENANCE
Coat the blade before and once an hour during operation
with machine oil or similar.
NOTE:
- After operation, remove the dust from both sides of the
blade with a wire brush, wipe it clean, and then apply enou-
gh low-viscosity oil, such as machine oil, etc. and lubrica-
ting oil spray.
CAUTION:
- Do not wash the blades with water. Failure to do so may
cause rust or damage to the tool.
SYMBOLS
Read the manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Indoor use only
Do not expose to rain or water
Do not burn
Do not dispose of batteries.
Return exhausted batteries to your local
collection or recycling point.
Summary of Contents for 48362
Page 1: ...48362 ...
