USER MANUAL
Vauconsant SA, all rights reserved A635xx -rev0-ENG, 22/10/2010 - 4 -
Installation
•
Installation:
o
Installation of a breath shield (option)
1.
Dismantle the upper glass brackets with a six-sided spanner Ø 2.5
2.
Stick the black non-slip adhesive patches in the specified markings on the part of the bracket in
contact with the breath shield.
3.
Install the glass, the non-domed end should be positioned 120 km from the edge of the beam. In
the case of the "salad bar" option, centre the glass.
4.
Tighten the upper brackets.
•
Overhang adjustment
The unit’s overhangs should be positioned as shown below.
The unit should be level.
*
Upper glass brackets
