LCD INDICATIONS AND SYMBOLS
1 . Low Battery Indication
2 . Measurement Icon
3 . Current Reading
4 . Switch Off “REF” function
5 . Threshold Value Selection
6 . Temperature Unit (°C/°F)
7 . Reference Temperature
8 . REF Icon
BUTTON FUNCTIONS
• SET button: Sets Reference Temperature, °C or °F unit and Emissivity
adjustment mode .
• Shift Left/Right Buttons: Sets Threshold values {0 .5° C (1° F), 3° C (5° F)
, 5° C(10° F), OFF} and Emissivity (0 .1 to 1 .0) .
BATTERY INSTALLATION/REPLACEMENT
To maintain reading accuracy, when the low
battery icon appears, replace thermometer’s battery .
1 . Place fingers behind the battery housing cover tabs
and gently pull open the cover .
2 . Pull the plastic ribbon under the batteries to pull the
batteries out .
3 . Insert two fresh AA Alkaline batteries (with correct
polarity as shown by the marking on the side of
battery housing) over the plastic ribbon inside the
housing . Close the cover .
• Always purchase the correct size and grade of battery
most suitable for the intended use . Always replace
both batteries and install with correct polarity inside
thermometer .
4
PLASTIC RIBBON
HOUSING COVER
BATTERY
POLARITY
MARKING
BATTERY
COVER TAB
