9. To access the bulb, lift the latch
to release the door.
8. Apply a 3mm bead of silicone
around the perimeter of the
product. Ensure there is a
complete seal between the
product and the wall.
7. Secure the bottom of the
product to the wall using
mounting screws.
Ensure the product is secured to
the wall.
12. After accessing the bulb,
gently close the door. Close the
latch and ensure it is secure.
11. When the bulb has been
replaced, replace the gasket and
the glass cap ensuring the cap is
secured tightly. NOTE: The cap
must be tightly secured, failure to
secure the cap will result in water
ingress and risk of electrical shock.
10. To replace the bulb, unscrew
the glass cap on the lamp holder
and remove the bulb.
www.vaughandesigns.com
Stratfield Wall Lantern
WA0364
