Vaultek SLIDER, Instruction Manual

07 Vaultek

®

08 Vaultek

®

Master Code Programming

First time users should change the default code as soon as possible

 to prevent unauthorized access to your safe. 

You will also use this master code to pair the Vaultek

®

 app on your smartphone, so it should be kept 

confidential. 

TIP: Code Requirements

Open the safe. Note, keys are included. With the safe open, press and hold the 

"PROGRAM" button (3 seconds)(Figure E) until all keys turn RED and let go.

Enter your NEW master code.

IMMEDIATELY

 Press and hold the "PROGRAM" button a second time (3 seconds) until 

all keys turn RED and let go.

Enter your NEW master code a second time.

IMMEDIATELY 

Press and hold the "PROGRAM" button together a third time (3 

seconds) until the safe beeps and all keys turn GREEN and let go. This tone 

confirms that the code has been reset.

If you make a mistake and the new code will not work, simply start over with step 1.

   Your code can be a minimum of 4 and a maximum  

   of 8 digits. We recommend a code 6 to 8 digits in  

   length using at least one of each key to make it  

   more difficult for someone to guess your code. For  

   your security, the safe will time out and sleep for 4  

   minutes if 6 incorrect entries are made.

   Two keys cannot be pressed simultaneously.

Programming a new code will overwrite your 

previous code.

TIP!

 The Vaultek

®

 app will ask for your safe’s master 

code during pairing and anytime you change the 

code the app will ask you to re-pair.

Battery Maintenance

Testing the Battery Power

To check the battery level, press and hold the '5' key on the keypad for 3 seconds. The keys will glow GREEN or 

RED to indicate the battery level:

Remaining Battery Capacity Level

If 4 keys glow green: 80%-100%

If 3 keys glow green: 60%-80%

If 2 keys glow green: 40%-60%

If 1 key glows green: 20%-40%

If 1 key glows red: 10%-20%

If 1 key blinks red: less than 10%

FIGURE E

E

For tutorials, setup help, and FAQs visit 

www.vaulteksafe.com/setup/

 and select your safe.

Low Battery

If the first key blinks RED several times and you hear 

several rapid beeps when opening the safe, your 

battery level is critically low and your safe needs to be 

charged immediately.

IMPORTANT

Use a 3.7V 18650 rechargeable lithium-ion battery with a flat top. A minimum 2000 mAh capacity is required, 

however 2200 mAh or higher can be used to increase operation time.

A high capacity battery upgrade is available as an accessory through our website.

The adapter used to charge the battery should output 5V/2000mA or above when using micro-USB cable.

Soft Reset TIP

In the event the battery dies or a soft reset is performed (battery removal and installation) the safe will restore 

default settings for interior light, sound, and Alert of Manual Unlock feature. These settings will need to be 

readjusted, however the master code and fingerprint scanner will not be affected.