OPERATING MANUAL 2200 K-SM V3.4/20-EN
Page | 3
1.
Technical data
Description
2200 K-SM
Operating pressure
2-8 bar
Maximum pressure
8 bar
Container volume
1 litre
Connection thread
¼“
Compressed air connection
Quick coupling
Jet adjustment
yes
Measurement 2000 KSM
approx. 245 x 220 x 125 mm
Net weight
approx. 725 g
Gross weight
approx. 974 g
Required air quality
Filtered and condensate-free
2.
Extent of delivery
Abrasive gun, plastic container, operating manual
3.
Intended use
This abrasive gun in light design is a compressed air operated tool for manual
use. It is suitable for processing abrasives.
4.
Features
The effectiveness of the 2200 K-SM abrasive gun is based on the Venturi effect.
For this purpose, an air stream is used which accelerates as it flows through the
air nozzle and thus generates negative pressure in the adjoining riser pipe. The
abrasive is thereby sucked in and sprayed out via the nozzle by the air flow.
5.
Safety instructions
Protect yourself and the environment by taking appropriate precautions against
the risk of accidents and observe the following instructions in your own inter-
est:
•
The operator must ensure proper operation.
•
Do not bring compressed air and abrasives in contact with skin
or eyes.
•
Keep children and pets away from the operating area.
•
Never direct abrasive at animals, people or yourself.
•
No manipulations, emergency repairs or misappropriation
may be carried out on the gun.
•
Abrasive guns may only be operated and maintained by in-
structed persons.
•
Repairs must only be carried out by qualified persons.
The following applies to all maintenance and repair work:
