OPERATING MANUAL 2200 K-SM V3.4/20-EN
Page | 5
8.
Storage
The compressed air tool must be stored under the following conditions:
•
Remove residual material from the container.
•
Carefully clean the abrasive gun after each use.
•
Store in a dry and dust-free place.
•
Do not expose to liquids and/or aggressive chemicals.
•
Keep out of the reach of children.
9.
Troubleshooting
In all cases of malfunction, please check first whether there is sufficient com-
pressed air available and whether the abrasive is dissolved/absorbent.
•
Gun sprays messy:
Possible cause: Abrasive media pipe, riser pipe or vent hole dirty.
Solution: Clean parts.
•
Gun does not spray any material:
Possible cause:
Riser pipe/abrasive media pipe blocked; grain size of the
abrasive too large.
Solution: Clean clogged parts; use suitable grain size.
•
Air escapes from the spray nozzle even though the trigger is in its initial
position:
Possible cause: Valve bolt is jammed.
Solution: Pour oil onto the valve bolt and/or into the compressed air intake.
Operate the trigger several times.
10.
Warranty terms
The basis for all warranty claims is the complete abrasive gun and the proof of
purchase. Damage caused by improper handling of the abrasive gun is not cov-
ered by the warranty.
If you have any questions, please indicate the type designation or the article
number of the abrasive gun.
•
In conformity with legal regulations, you receive a 24-month warranty on all
products against material and manufacturing defects.
Excluded from the warranty:
•
Wear parts.
•
Damage caused by improper use.
•
Damage caused by lack of maintenance.
•
Damage caused by dirt.
•
Damage caused by untreated compressed air.
If warranty claims are made, the abrasive gun must be in its original condition.
