background image

OPERATING MANUAL 3000 DV / DVR                                                                      V5.4/20-EN 

Page | 4 

Protect yourself and the environment by taking appropriate precautions against 
the risk of accidents and observe the following instructions in your own inter-
est: 
 

 

The operator must ensure proper operation. 

 

 

Do not bring compressed air and/or medium into contact with 

skin or eyes. 

 

Never direct the spray jet at animals, people or yourself.  

 

Keep children and pets away from the operating area. 

 

No  manipulations,  emergency  repairs  or  misappropriations 
may be carried out on the pressure cup gun. 

 

Pressure cup guns may only be operated and maintained  by 
instructed persons.  

 

Repairs must only be carried out by qualified persons. 
 

The following applies to all maintenance and repair work:  

 

It  is  essential  to  disconnect  the  pressure  cup  gun  from  the 
compressed air connection before carrying out maintenance 
or repair work. 

 

Only use original spare parts. 

 

The  maximum  working  pressure  must  not  be  exceeded  (see 
point  1  "Technical  data").  The  working  pressure  must  be 
adjusted via a (filter) pressure reducer. 

 

Only use compressed air as energy source. 

 

The compressed air connection may only be made via a quick 
coupling. 

 

When working with the pressure cup gun, wear the necessary 
protective clothing, protective goggles, work gloves, ear pro-
tection if necessary and a respirator mask. 

 

If there are leaks in the device or other operating faults, the 
device must be disconnected from the compressed air supply 
immediately and the cause of the fault must be eliminated. 

 

Open fire, sparks or smoking is prohibited. 

 

Beware of flammable materials. 

 

Processed media and cleaning media must be disposed of in 
an environmentally friendly manner. 

 

The disposal of the compressed air device must be carried out 
according to the valid legal regulations. 

 
 
 

 
 
 

Summary of Contents for 3000 DV











Reviews: