OPERATING MANUAL 3300 HSDR V4.4/20-EN
Page | 4
•
Do not bring compressed air and/or medium into contact with
skin or eyes.
•
Never direct the spray jet at animals, people or yourself.
•
Keep children and pets away from the operating area.
•
No manipulations, emergency repairs or misappropriations
may be carried out on the pressure cup gun.
•
Pressure cup guns may only be operated and maintained by
instructed persons.
•
Repairs must only be carried out by qualified persons.
The following applies to all maintenance and repair work:
•
It is essential to disconnect the pressure cup gun from the
compressed air connection before carrying out maintenance
or repair work.
•
Only use original spare parts.
•
The maximum working pressure must not be exceeded (see
point 1 "Technical data"). The working pressure must be
adjusted via a (filter) pressure reducer.
•
Only use compressed air as energy source.
•
The compressed air connection may only be made via a quick
coupling.
•
When working with the pressure cup gun, wear the necessary
protective clothing, protective goggles, work gloves, ear pro-
tection if necessary and a respirator mask.
•
If there are leaks in the device or other operating faults, the
device must be disconnected from the compressed air supply
immediately and the cause of the fault must be eliminated.
•
Open fire, sparks or smoking is prohibited.
•
Beware of flammable materials.
•
Processed media and cleaning media must be disposed of in
an environmentally friendly manner.
•
The disposal of the compressed air device must be carried out
according to the valid legal regulations.
6.
Installation/ end of work
Preparing the gun for the first start-up: Screw in the compressed air connection
and tighten it firmly using a 13 mm open-end wrench or ring spanner, if
necessary glue it in place.
With optional pressure regulator instead of air volume regulation:
Screw the
pressure gauge included in the extent of delivery into the pressure regulator, if
necessary glue it in.
Start-up: Unscrew the pressure container and fill the medium into the con-
tainer. Then hand-tighten the gun with the container cover onto the pressure
container. Do not use any tools for this! Plug the connecting nipple of the hose
