Vehicle care
167
2. Sealant and air hose: Unwrap the
clear sealant/air hose and the
power plug.
Air only hose: Unwrap the black
air only hose and the power plug.
3. Place the kit on the ground.
Make sure the tyre valve stem is
positioned close to the ground, so
the hose will reach it.
4. Remove the valve stem cap from
the flat tyre by turning it
counterclockwise.
5. Attach the clear sealant/air hose
or the black air only hose onto the
tyre valve stem. Turn it clockwise
until it is tight.
6. Plug the power plug into an
accessory power outlet in the
vehicle. Unplug all items from
other accessory power outlets.
Power outlets
3
61.
Do not pinch the power plug cord
in the door or window.
7. Start the vehicle. The vehicle
must be running while using the
air compressor.
8. Sealant and air hose: Press and
turn the selector switch
counterclockwise to
e
.
Summary of Contents for Ampera
