Assemble the Outer Frames
2.3
Mount on the Wall
2.4
12 // ALR Screen for UST Projector
ALR Screen for UST Projector // 13
1. Place the outer frames against the inner frames, align the four
corners and fix with the included M4*8 screws.
2. Fix the plastic corner protectors onto the four corners.
1. Estimate the wall mount area for the screen. The lower edge of
the screen should be 60-80cm / 23.6-31.5 in above the ground
(as shown below).
2. Measure the distance between the spots where the wall
brackets will be mounted with the included level ruler.
Recommended Distance
23.6- 31.5 in
9.8 in
3.0 in
42.7 in
3.6 in
11.8 in
11.8 in
55.1 in
11
11
11
11
10-B
10-C
10-C
10-A
10-A
10-B
11
10-A/10-B: Horizontal Outer Frame 10-C: Vertical Outer Frame
: Corner Protector
Outer Frame
Inner Frame
Screen
