Vax Service line:
AU: 1300 361 505
NZ: 0800 800 900
vax.com.au
10
Maintenance
(Keep your Vax as good as new)
Removing blockages
Removing blockages from the brushbar
Removing blockages from the TurboTool
WARNING:
To reduce the risk of electric shock, turn the vacuum cleaner off and unplug from the electrical
outlet before performing maintenance/troubleshooting checks.
Disconnect the hose from the vacuum cleaner and remove any blockages found then reconnect the hose securely.
Unscrew the 4 screws
on the base of unit.
Slide off the locking ring.
Pivot lowering housing and
remove clog.
To re-assemble, be sure that the
tabs are engaged. Pivot the lower
housing closed. Slip the locking ring
into the groove at the neck of the
Turbo Tool to complete reassembly.
Remove cover of
floor nozzle.
Lift the brush bar out of its
position.
Remove the belt from the
end of the brushbar.
Advanced filter cleaning
