Vax Air Force VAFTHU User Manual Download

Page: 8 / 14

Vax Service line:

AU: 1300 361 505

NZ: 0800 800 900

vax.com.au

Operation

Using accessories

Attaching the hose

Attaching the telescopic extension tube

NOTE:

The 3-in-1 tool and TurboTool can be attached to the telescopic tube or hose directly.

NOTE:

The hard floor tool can ONLY be attached to the telescopic tube.

NOTE:

To change setting on your 3-in-1 tool, press in the Vax logo located at the top of the tool.

Press the latch release on
the hose before removing.

Remove telescopic
extension tube.

Choose an accessory.

Attach hose to telescopic
extension tube ensuring
the latch secures the hose.

Choose an accessory.

Attach accessory to
telescopic extension tube.

Attach accessory to hose
ensuring the latch secures
the accessory.

Hard floor tool can only be
attached to telescopic tube.

Summary of Contents for Air Force VAFTHU















Search results

Summary of Contents for Air Force VAFTHU

Reviews:

Related manuals for Air Force VAFTHU

Brands by name

Popular brands

Vax Air Force VAFTHU, User Manual

Search results

Summary of Contents for Air Force VAFTHU

Reviews:

Related manuals for Air Force VAFTHU

Brands by name

Popular brands