1
2
How to use your VS-21
Assembling the appliance
Fig. 1
Assemble tubes as fig.1 and attach to the handle/flexible hose
Fig.1a
Slide the tool holding bracket over the end of the tube and tighten with a screw driver. Vax recommends
positioning the bracket approx 16cm from the tube base as illustrated in fig. 1a. This allows the bracket to be
used in the tool park function (explained in fig’s 11 and 12).
Fig. 2
To attach the flexible hose to the vacuum cleaner, push the connecting end of the flexible hose into the
attachment point on the vacuum cleaner.
1a
