Press button on post-
motor filter cover pull
to remove.
For best cleaning results, replace the post-motor filter every 12 months.
Tap the post-motor filter
over a bin to release dirt
/debris. Always replace
before using your vacuum.
Pull tabs on post-motor
filter to remove.
Press cord rewind button
to retract cord into
vacuum cleaner.
Place floor head into
parking slot located at rear
of vacuum cleaner
for storage and carrying.
Cleaning the post-motor filter
Storing your vacuum cleaner
Let’s talk technical
Let’s talk technical
Do not wash the post-motor filter.
WARNING
IMPORTANT: Remove accessory from hose or telescopic extension tube before performing maintenance or trouble
shooting checks.
Removing blockages from the TurboTool*
Tabs
Slide the locking ring
to remove.
Lift and separate
the housing.
Using a pair of scissors,
remove any threads
or hair caught around
the brushbar.
Line up the tabs on front of
housing and push together
to refit. Slide locking ring
into groove to secure.
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
TIP
To test for a blockage in hose,
drop a small ball of paper into the
hose. The paper will drop through
if the hose is clear.
Remove the hose from the vacuum
cleaner and telescopic extension tube.
Remove any blockage by inserting wire
coat hanger in to hose.
Removing a blockage from the hose
