Carpet Glider (Type 1)
1-1-132671-00
Shoulder Strap
1-1-132373-00
Pro Cleaning pads (Type 6)
1-1-132319-00
Assembling your steamer
Push the main body down
into the floor head until it
clicks into place.
Stand the steamer upright
by pushing the main body
forward to lock into position.
Push the handle into main
body until it clicks into place.
Before you begin cleaning
• Test for colour fastness in a small hidden area of upholstery/fabric to check for colour removal before use.
• When using the steamer, basic safety precautions should always be observed.
• Don’t aim the steamer at people, animals, plants and electrical components such as interior of ovens or wires.
Never touch the steam jet or floor head from a short distance (there is a risk of scalding).
• The steamer is equipped with a thermostat and a thermal cut-out. If for any reason the steamer overheats it will
switch off. If this happens turn off and unplug the steamer, allow to cool for a least 2 to 4 hours and re-start.
• Don’t use hot or boiling water to fill clean water tank.
CAUTION:
The steamer head gets very hot during use. Always switch off the steamer before emptying the water
tank or changing the cleaning pads/accessories.
IMPORTANT:
Please refer to floor manufacturer’s care recommendations before use and test the steamer on an
hidden area of flooring/surface to begin with.
Getting started
