background image

Vax Careline:   

AU: 1300 361 505 

NZ: 0800 800 900

vax.com.au 

vax.co.nz

5

Operation

Unpacking

Attaching the tube and handle

WARNING:

 Keep the packaging for storing the appliance, or for it to be transported safely. 

Always transport or ship the appliance in its original packaging to avoid damage.

1. Unpack the appliance and all its accessories.
2. Check the contents for completeness and possible damage (Machine Overview).

NOTE:

 The upper and lower end of the tube are identical in construction.

Insert the handle into the tube and push forcefully until you can hear and 
feel the handle click into place.

NOTE:

 Only then can you be sure that the electric contacts inside the 

handle engage in the tube.

NOTE:

 If you want to take the handle back out, push the small square 

on the tube (point 1) powerfully with a small blunt object and pull on the 
handle at the same time.

Insert the tube into the holder on the brush base and push 
powerfully until: 
-  the small square on the tube has disappeared; and
-  you can feel and hear the tube click into place.

NOTE:

 Only then can you be sure that the electric contacts inside the tube 

engage in the holder.

NOTE:

 If you want to pull the tube back out, push in the release catch 

on the holder (point 1) forcefully and pull on the tube at the same time.

Summary of Contents for DUPLEX VX14

















Reviews: