Vax Floormate Trio, User Manual

Remove any packaging from the 

nozzle and ensure latches are 

out, insert nozzle into middle 

section of the base 

While holding nozzle in 

place, slide latches inward 

to lock it into position

Before you begin cleaning

IMPORTANT: 

Only use Vax hard floors cleaning solution. Using other solutions may cause excess foaming.  

Excessive foam will prevent the machine from working effectively. Using other solutions will invalidate the guarantee.

Getting started

Using your machine

PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE

Raise handle to upright 

position until it locks  

into place 

To lower handle, press 

handle release button  

and fold handle to  

storage position

To install brushes rest the machine on the 

floor. Align the post on the spin brushes 

with the square hole

Push brushes firmly at 

both ends until it locks 

into place 

Lock tank cap into place to 

prevent leaking 

Slide tank into machine until 

latch snaps into position

To remove the clean water 

tank, squeeze release button 

and pull tank straight out

Twist tank cap counter 

clockwise and lift to remove

Using the tank cap as 

a measuring cup, pour 

the required amount of 

solution (approx. 60ml per 

1 litre of water)

Pour cleaning solution  

into tank. Top up tank to  

fill line with warm water 

(Max 40°C)

Filling the clean water tank

Always switch the 

machine off and unplug 

before carrying out any 

maintenance.

WARNING

Please remove any large objects or debris prior to using your Floormate Trio.