Vax Floormate Trio, User Manual

Using your machine

Using your machine

The mode selector allows you to choose 

DRY VAC, WASH or WET PICKUP. For dry 

debris pick up turn the dial to DRY VAC,  

the brushes will not rotate

To wash hard floors turn 

the dial to WASH, brushes 

will automatically rotate. For 

spills/wet pickup turn the dial 

to WET PICKUP, the brushes 

will not rotate

In WASH mode slowly move the 

machine forward to arms length 

squeezing the trigger to release 

the solution. Release trigger and 

pull back machine to pick up

Emptying the recovery tank

To remove recovery tank, 

press down on release 

button and pull 

Remove recovery tank lid 

to empty

Note:

 The recovery tank has an automatic shut off to prevent the tank from 

overflowing. If this is activated, the machine will not pick up and the sound of the 

motor will change. The recovery tank will need to be emptied.

TIP

We recommend that the 

recovery tank is emptied  

after dry pick up and  

before wet operation.

Using your machine

Using your machine

Push switch to turn machine 

on, push switch again to turn 

machine off

Step on release pedal to 

recline machine

To move your machine from 

room to room, put the handle 

in the upright position and tilt 

machine back on rear wheels

The machine can also be 

moved by lifting the machine 

using the carry handle on 

the front

TIP

Brushes will only rotate  

in WASH mode.