background image

Let’s talk safety

Basic  

safety  

precautions

Don’ts

Do’s

This pressure washer is intended for household use only 

and NOT for commercial or industrial use.

• This Pressure washer is for outdoor use only.

• It is your responsibility to check the suitability of the surface

  to be cleaned. Vax UK Ltd cannot be held responsible for

  damage caused.

• Keep fingers, hair and loose clothing from moving parts

  and openings whilst using the pressure washer.

• When using your pressure washer the recommended working

  distance between the nozzle and surface area or object to be 

cleaned is 30cm.

• Don’t leave the pressure washer unattended or running when not 

in use for more than 5 minutes without depressing the trigger.

• Don’t use this pressure washer if it has been dropped,

  damaged or immersed in water.

• Don’t use pressure washer if the power cord or plug is

  damaged. Please contact our Customer Care Line on (UK)

  0330 026 8455 (ROI) 1-800 928 308. (Mon - Fri 8:30am 

to 6:30pm, Sat 9:00am to 5:00pm).

• Don’t handle the plug of the pressure washer with wet hands.

• Don’t use the pressure washer without supply hose (minimum

  length 7.5m) in place and unwind the hose fully from reel.

• Always wear suitable clothing footwear and eye protection

  whilst using the pressure washer.

• Always connect the water supply, remove the lance and squeeze

  the trigger to run water through the machine before switching

  the power on.

• Always use a suitable hose connector to match the coupling

  on the pressure washer with a non-return valve at tap end

  of the supply hose.

• Always unplug the pressure washer before cleaning or carrying

  out any maintenance.

• Always turn off and unplug the pressure washer before

  disconnecting or connecting the hose, after use always wrap  

the pressure hose and power cord around the storage  

clips provided.

Summary of Contents for PowerWash3 VPW4C

















Reviews: