7
NOTE
: Use only Vax AAA Carpet Cleaner solution.
Using other cleaning solutions may cause excess
foaming. Excessive foam will cause the float to shut off
the carpet washer prematurely. Using other solutions
will void the warranty.
6. Accessories
For Cleaning Upholstery and Stairs
1.
Put carpet washer in its upright position, then turn
off. Connect the upholstery attachment to the
trigger adaptor (Fig.6/1).
2.
Remove the dirty water tank door from the top
of the dirty water tank (Fig.6/2).
3.
Insert the upholstery/stair hose adaptor into the
opening on top of the dirty water tank (Fig.6/3).
Fig.6/3
Fig.6/2
Fig.6/1
4.
Connect the hose solution tube into the fitting on
the lower left side of handle facing carpet washer
(Fig.6/4).
Attachment Usage
Turn the power on/off switch to on. While depressing
solution spray trigger, pull attachment in backward
motion (Fig.6/5). Release trigger and push attachment
forward in the same path to remove dirty water and
solution from upholstery. (For heavily soiled areas,
repeat if necessary.)
NOTE:
Do not oversaturate the upholstery.
IMPORTANT:
For best cleaning results use steady,
moderate, forward and backward motion. Make sure
upholstery is dry before use.
NOTE:
If the dirty water tank door is not replaced,
there will be no suction through the floor nozzle and
the unit will not operate properly.
Fig.6/5
Fig.6/4
How to Operate/Accessories
Vax V-023 D6 mm.qxd 9/8/05 10:34 AM Page 7
