background image

11

Any other servicing should be done by an  

authorized service representative. If the  

appliance is not working as it should,  

has been dropped, damaged, left outdoors 

or dropped into water, take it to a service 

center prior to continuing use. 

This would be a good time to check the  

condition of your filter. Dirty?  

Check out page 10 for cleaning steps.

PRESS

CLICK

7

9

PRESS THE DIRT CUP LID 

LATCH.

DITCH THE DIRT. GIVE IT  

A SHAKE TO REMOVE  

ANY DEBRIS.

REMEMBER TO CLEAN THE 

FILTER AND CLOSE THE LID 

UNTIL THE LATCH CLICKS. 

 

WARNING

 

To reduce the risk of personal injury -  

Turn off before cleaning or servicing. Do  

not use vacuum without dirt cup or filters  

in place. 

Any other servicing should be done by an  

authorized service representative. If the  

appliance is not working as it should,  

has been dropped, damaged, left outdoors 

or dropped into water, take it to a service 

center prior to continuing use. 

This would be a good time to check the  

condition of your filter. Dirty?  

Check out page 10 for cleaning steps.

PRESS

CLICK

7

9

PRESS THE DIRT CUP LID 

LATCH.

DITCH THE DIRT. GIVE IT  

A SHAKE TO REMOVE  

ANY DEBRIS.

REMEMBER TO CLEAN THE 

FILTER AND CLOSE THE LID 

UNTIL THE LATCH CLICKS. 

 

WARNING

 

To reduce the risk of personal injury -  

Turn off before cleaning or servicing. Do  

not use vacuum without dirt cup or filters  

in place. 

Any other servicing should be done by an  

authorized service representative. If the  

appliance is not working as it should,  

has been dropped, damaged, left outdoors 

or dropped into water, take it to a service 

center prior to continuing use. 

This would be a good time to check the  

condition of your filter. Dirty?  

Check out page 10 for cleaning steps.

PRESS

CLICK

7

9

PRESS THE DIRT CUP LID 

LATCH.

DITCH THE DIRT. GIVE IT  

A SHAKE TO REMOVE  

ANY DEBRIS.

REMEMBER TO CLEAN THE 

FILTER AND CLOSE THE LID 

UNTIL THE LATCH CLICKS. 

 

WARNING

 

To reduce the risk of personal injury -  

Turn off before cleaning or servicing. Do  

not use vacuum without dirt cup or filters  

in place. 

Any other servicing should be done by an  

authorized service representative. If the  

appliance is not working as it should,  

has been dropped, damaged, left outdoors 

or dropped into water, take it to a service 

center prior to continuing use. 

This would be a good time to check the  

condition of your filter. Dirty?  

Check out page 10 for cleaning steps.

PRESS

CLICK

7

9

PRESS THE DIRT CUP LID 

LATCH.

DITCH THE DIRT. GIVE IT  

A SHAKE TO REMOVE  

ANY DEBRIS.

REMEMBER TO CLEAN THE 

FILTER AND CLOSE THE LID 

UNTIL THE LATCH CLICKS. 

 

WARNING

 

To reduce the risk of personal injury -  

Turn off before cleaning or servicing. Do  

not use vacuum without dirt cup or filters  

in place. 

HOW TO EMPTY 

THE DIRT CUP

Press the dirt cup lid latch.

Remember to clean the filter and close the lid until 

the latch clicks.

Empty the cup. Give it a shake to remove any 

debris.

Power

Click

1.

3.

2.

! WARNING

To reduce the risk of personal injury -

Turn off before cleaning or servicing. Do not use 

vacuum without dirt cup or filters in place.

Summary of Contents for Reach VX92





















Reviews: