18
716
Slow Pulse = Charging
(Continuous during charge cycle)
Fast Blink = Error
(15 seconds duration for error code)
LED Illumination
Any other servicing should be done by an authorized service representative. If appliance is not
working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it
to a service center prior to continuing use.
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Vacuum won't run
1. Battery not charged.
1. Charge battery for up to 3 hours. The
indicator lights will pulse while charging and
turn off once fully charged.
2. Battery dead - won’t hold
charge.
2. Contact customer service. Visit our website
at www.dirtdevil.com or
call 1-800-321-1134.
3. Needs service.
3. Contact customer service. Visit our website
at www.dirtdevil.com or
call 1-800-321-1134..
Charger indicator
flashes and then
goes out
1. Problem with the charging
circuit
1. Contact customer service. Visit our website
at www.dirtdevil.com or
call 1-800-321-1134.
To reduce the risk of personal injury - Turn off before cleaning or servicing.
WARNING
at www.vax.com.au or
at www.vax.com.au or
at www.vax.com.au or
call 1300 VAX AUS.
call 1300 VAX AUS.
call 1300 VAX AUS.
TROUBLESHOOTING
Any other servicing should be done by an authorized service representative. If appliance is not working as
it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a service center prior
to continuing use.
Summary of Contents for Reach VX92
Page 1: ...VX92 VX93 VX94 VX95 USER GUIDE REACH...
Page 19: ...19...