Assembly
3
vax.co.uk
Slide the handle down onto the
main body of the unit.
Assembling your upright
PLEASE READ SAFETY INFORMATION BEFORE USE
(PAGE 8)
Insert the upper carry handle into
the rear of the unit.
Insert the U shaped pin at the
front of the unit.
Connect the upper hose to the
upper hose connector until it clicks
into position (1).
Insert the lower hose to the lower
hose connector (2).
Attach the dirt container to the unit
until a click is heard.
Secure the carry handle to
the vacuum by tightening the
three screws located on the back
of the unit.
1
2
