7
–
OPERATING INSTRUCTIONS
18
A
B
Photo 25
A)
Metal retainer for front rubber blade
B)
Front rubber blade
7.8
SQUEEGEE ADJUSTMENT
A
The two wheels at the sides of the squeegee
(Photo 26 -A) and the central wheel (Photo 27 –A)
are to adjust the pressure of the squeegee to the
B
Photo 26
floor.
These adjusting wheels allow differing ride heights
in order to change the squeegee pressure on the
floor. By unlocking the fixing nut (Photo 26 -B, 27 -
B) it is possible to rotate the wheel up or down and
move the blade. When the squeegee is perfectly
adjusted, the rear squeegee blade, sliding as it
moves, bends in all points forming an angle of
45° with the floor.
(!) Changing the squeegee position adjusts the
pressure to the floor; which in turn may affect a
uniform drying line. Damp patches mean that
drying is insufficient; which requires the squeegee
to be adjusted to reach optimal drying.
A)
Eccentric wheel for squeegee pressure
adjustment - side wheel
B)
Fixing nut of the eccentric wheel
A
B
Photo 27
A)
Eccentric wheel for squeegee pressure
adjustment - central wheel
B)
Fixing nut of the eccentric wheel