background image

Service and help

Vax Commercial Careline: (UK) 0330 026 4275 

15

Vax Commercial Careline:

(UK) 0330 026 4275

Monday-Friday 

8:30am to 6:30pm

Saturday-Sunday  9:00am to 5:00pm 

Any queries or concerns about using your Vax, call the Vax Commercial Careline. Calls are charged at the UK local 

rate. Please make a note of the serial number and model number of the hard floor cleaner before calling.  

For the nearest Service Agent, please call the Vax Commercial Careline or visit 

vaxcommercial.co.uk.

Technical Specification

Power: 

20V DC (per battery)

Run time: 

25mins 

(based upon use of both wash  

 

and scrub functions)

Charge time: 

3 hours

Cleaning width: 

30cm

Water capacity: 

1.5Ltr

Detergent capacity:  1.5Ltr
Cable: Cordless
Weight: 6.4kg

Consumables

To purchase spares and accessories, please visit 

vaxcommercial.co.uk

Battery  

Part No. 1-1-135988-00

Charger  

Part No. 1-5-134375-00

Red SpinScrub (Washroom) 

Part No. 1-1-135985-00

Blue SpinScrub (General Use)  Part No. 1-1-135986-00
Green SpinScrub (Catering) 

Part No. 1-1-135987-00

Replacement Nozzle 

Available on request

Foam Filter 

Part No. 1-7-133725-00

Subject to technical change without notice.

EEC Statement of Compliance

Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the

VCSD-03 series is manufactured in compliance with the following Directives:

Safety:

 2006/95/EC Low Voltage Directive.

EMC:

 2004/108/EC Electromagnetic Compatibility Directive Disposal.

Energy Labelling:

 2010/30/EU Labelling and standard product information directive.

Disposal

Waste electrical products should not be disposed of with household waste.  

Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

VCSD-03_HardFloor_Commercial_UG_[VAX001553]_PRINT_261114.indd   15

27/11/2014   08:32

Summary of Contents for VCSD-03

















Reviews: