7
Vax Careline
0870 606 1248
dirt container and filters/ clearing blockages
The filter can be tapped against the side of a dust bin to
remove the excess dirt and dust (Fig 6/8).
The post- motor filter may be rinsed in warm water (max
40 deg.). Allow to air dry for 24 hours before replacing.
NOTE:
Do not use any detergents or boiling water to
wash the filters. Vax recommends washing the filter.
Vax recommends washing the filter every 9-12 months.
Once completely dry, return the post-motor filter to the
vacuum cleaner. Replace the post-motor filter cover
before restarting the vacuum cleaner.
7. Cleaning Blockages
WARNING:
To reduce the risk of electric shock, the
power cord must be disconnected before
performing maintenance/troubleshooting checks.
1.
Turn the vacuum cleaner off and unplug from the
electrical outlet.
2.
The flexible hose may be disconnected from the
vacuum cleaner by pressing the clip on the
connector and pulling away from the machine.
Remove any bloackages found then re-connect the
hose securely.
!
Fig.6/8
Vax VZL-7062.qxd:Vax VZL-7062 User Guide
10/4/08 08:50 Page 7
Downloaded From Vacuum-Manual.com Manuals