Select
Rinse
on the mode
selector switch.
Rinsing your carpets/hard floor
Rinsing is not necessary, but will help remove detergent residue leaving your carpets/hard floor looking fresher.
Max Extract
For superior drying performance use the
Max Extract
pedal with
Max Extract
on the mode selector switch.
The SpinScrub brushes will not spin when the
Max Extract
pedal is pressed, the entire power of the carpet washer
is used to extract water/detergent from your carpets.
Washing your carpets
Using your machine
Using your machine
Plug into mains, press the on
/off button to switch on.
Squeeze trigger to release
detergent and water mix.
Squeeze trigger to release
water.
Squeeze trigger on forward
stroke, release trigger on
backward stroke to recover water.
Press the recline pedal and pull
handle backwards.
Squeeze trigger on the
forward stroke, release trigger
on backward stroke to recover
detergent/water.
Select
Wash
on the mode
selector switch.
NOTE: Carpets should be dry vacuumed thoroughly before washing.
Mode selector functions
WASH:
SpinScrub brushes deep clean your carpets with water and detergent removing dirt and stains.
RINSE:
Only water is released to remove detergent residue.
MAX EXTRACT:
Extracts any water/detergent from your carpets/hard floors (some models only). No water/detergent
mix will be released during this function (even when trigger is pressed). Use this mode in combination with the
Max
Extract
pedal for superior drying performance. Ideal for large spills.
TIP
Avoid saturating your carpet, do
not use more than 4 wet strokes
over one area. Always end with
dry strokes. For heavily soiled
areas, it may be necessary to
repeat the cleaning process.
Make crisscrossing strokes to
the original pattern and overlap
each pass.
Select
Max Extract
on the
mode selector switch.
Press the
Max Extract
pedal to activate the
Max
Extract
mode.
The brushes will not spin
when the
Max Extract
pedal is pressed but
may turn slowly as the
carpet washer is moved
forwards/backwards.
Press the
Max Extract
pedal to de-activate the
Max Extract
mode.
TIP
For best results use slow
straight parallel strokes.
